Thursday, March 29, 2007

So here's the upadate. I'm still working ont he bed, aslo working ont he steering, and shift linkage. Found out through some research that the tranny is a 200 R4. Made the same time as the 700 R4 but was phased out after the 700 was upgraded. Both were good trans, but the 700 can take more abusive or so I've read. Seems like everyone has an opinion to one thing or another. I've read so much crap ont he internet just trying to figure out what type of trans it was and how my shft linkage can work and a bunch of other nonsense. It's all correlated to what I'm doing, but when you start seeing conflicting arguments in forums on how to hook up the rear drive shaft and pinion angles, it can be like watching two drunk dudes fight it out while smoking cigarettes behind the propane tanks. yeah pointless.

So anyway, I reserved tomorrow to get a bunch of shit done, but of course I need stuff to get shit done. So Until I have I have the steering, shift linkage, and rear axl hoked up, there's no real point to working on the body. Feeling really down about it right now, haven't a clue what to do.

Good part of the past couple weeks, is that Melissa bought me some really f'in sweet rims for it, and I went to an auction to get some parts and came home with a sander and a bunch of moon hubcaps. They are cool. I also have all my steering parts except the column holder which is being made by my dad. So that should be done soon. I've not been liking the shift linkage I have adapted to the truck so i bought a sweet old skool LOKAR floor shift. Comes with everything that will hopefully fix my problems. It's a little bit of money, but I've wanted one super bad. I figure why not.

Well we'll see what is happening tomorrow. I hope to work on it most of the day but who knows...

Wednesday, March 14, 2007

Soup to Nuts! No not those nuts. Here are some pics of the bed being turned back into a bed. Not much else to say about that. Ryan did some welding on it, and everything turned out just fine. Also got the U-joints for the drive shaft and cleaned that up. No problem, wire wheel, a little sanding action did this thing just fine. Anyway enjoy the pics more to come hopefully. Alright.





Monday, March 05, 2007

Ok, Ok so I'm lazy. Here is the long awaited update from the past couple weeks. I'm trying to pack a lot of info into all my two fingertips can type out. Alright here we go. These first pics are of my floor. I've covered it in rubberized coating, yeah that's it.



Here are some pics of the full truck. I had to stick the door back on to get a good line to position the bed on. It's all about the lines. hahaha yeah anyway here are some other pics of the truck. These were taken while a lady with two giant dogs looked in at me. Think about it, a bearded bald dude, in bibs taking random pictures. yeah that's what i thought...





Finally I cut the bed down about a foot and am in the process of welding the posts back onto the bed. time consuming. I used the cross braces from the Dakota bed that I got with the truck parts, and welded them onto the bed. I lost some depth, but the damn truck is channeled and I really could care less. I don't see this hauling much except parts for itself. And maybe some people around during a cruise or two. Well here is is in all it's glory.





So all in all a pretty productive time since the last update. Other things that have been in the works. I ordered and received all steering materials needed to make this thing steer. I need to fabricate a steering column holder so that I can go about fitting the steering shafts and u-joints. It should be another project that takes a little to finalize, but it should turn out ok. Next big expense is going to be the wiring harness, but well worth the cost. Till next time, fingers and toes, (thanks melissa)

Monday, February 19, 2007

Here are some pics of the seat fitted as well as the dash in. We were looking at the steering setup and it needs to be tweaked, so pics too come. enjoy.


Here are some pics of the Finished floor. It was done last week, but I was too forgetful to take the camera over and get some pics. The only thing that needs done is the boxes on either side. Little boxes for tools or what not.







Thursday, February 08, 2007

This week has been -4˚ so now work as of yet. I do need to head over tonight and fix some things on the floor. But all in do time.

Thursday, February 01, 2007

Ryan and I started the Tunnel, and Kyle and I got a lot more done last night. All I have to do tonight is fabricate where it meets the firewall and we should be good to go. I hope to have this done and get the floor buttoned up tonight. I made a goal of getting it done by feb. 1st, and I hope I can do it. But overall it looks really good. and I'm proud of all the help I got and the work everyone has put into it. Thanks you guys.



Fun with fitting the seat.
Ryan and I had a few laughs. hahahahahaha stop it.



Ryan started stripping the bed.


Here are pics of the floor as of 1/25/07. I cannot seem to grasp the progession of the floor, but hopefully the viewers can.


Tuesday, January 23, 2007

Engine, 305

Looking away from the welder, cause again it hates me.

Kyle welding cause The welder hates me.

Friday, January 19, 2007

Melissa assembling the tool cart. Her fine craftsman gloves, and ratchets in hand. Soon she'll be grinding working and welding ont he truck. wooooohhahahahahhahahahahah.

Melissa's pic of Kyle and I working ont he floor. Such a great pic and a great photographer.

The Heater that makes me sweat, and keeps the garage warm. 55k BTU. Like a little rocket.

Here's Kyle's completely B.A. Scout. He too has a bunch of work ahead of him. Yes We'll be in the garage for a long time.

Here's some pics of the finished structure for the inside. Finished welding in the foot braces last night, so now I can focus on fitting the seat and skinning the floor.









Wednesday, January 17, 2007

Here are some pics of the progress to date. Since the truck was channeled when i purchased it, I decided to leave it that way. So this is what i've done so far. I bought some 1" square tubing and some 1 1/4" heavy duty square tubing and framed up the sub floor for the channeled sections. I started welding, and that's cool. Didn't know I could do it, but I watched kyle and tried it out for myself. Soon Melissa will be welding, she'll be addicted in no time. Kyle went over my welds and beefed them suckers up. Just cause I haven't got a handle on the situation yet.

Last night I managed to finish the right side subfloor and weld in the seat brackets. We fitted the seat loosley. Later this week we can fit it enough to drill out the holes. Then it's all about skinning the floor and moving on to the dash and steering. While I was busy with this floor project Ryan was grinding the bed bolts off. Seeing the bed is from a 55 Ford, The fender mounting bolts were shaved off and primed. He also cut the old hardware off and is almost done preparing it for him and melissa to begin cutting it down. I'm going to take about a foot off the bed to make it fit the frame. Well that's about it for now.







It's Been a while, so here are some pics of the garage and a partially messed up truck. We moved in the middle of december and ended up having to tarp the roof cause it leaked, and put plastic on the inside because it's not a finished garage. Try to hold the heat in whenever possible. After Kyle rewired the entire garage and put new plywood down, I think we've had our share of fixing up someone else's garage. Time to focus ont he vehicles. Kyle moved his Scout in today so now both vehicles reside in the Space. Most of you who read this actually already visited or have been working in the garage. So anyway, here's some pics.



Tuesday, November 28, 2006

So tonight I'm moving the peice of rod into the garage after a long search. I've strapped as much as I could to the bed, and the rest will go into kyle's truck. My brother and his buddy huey are going to help with the transportation of the truck. huey has a kickass truck and trailer setup that he's bringing so that'll help a lot. It's a lot to move but we can do it. With melissa directing us on her stacking power via long days of tetris, we'll get it done.

So I'll put up pics as soon as I can and update the status ont he old beast. I'm heading to vegas this saturday. S0 maybe I'll get to see some cool rides out there.

Anyway...

Wednesday, November 22, 2006

We looked at the garage across town with a leaky roof. But it's better than nothing. I handed in the rental agreement today and we should be moving stuff in by next week. Kyle is replacing some boards for the floors, but other than that I'm super excited to finally move. Updates too come.



Monday, November 06, 2006

Update: It's 11/06/06 and well so far no garage, the rent on the storage bin is going up, still haven't been able to work on it much due to it being in a storage facility and not in a garage. I know, I know pitty da fool who bought a Giant Money squeezer. Oh well I'll figure something out.

So I have decided to unchannel this rod. Making it easier to run exhaust, steering, and wiring of all sorts. Not too mention that since it's setting on a dakota frame, the frame rails run straight through the middle of the floors, causing a rift in the plan of the floors. So I have some floor braces and will put them in whenever I get more room to do so.

I did get a bed, as you see in the pic below. Another + to the raising, is the option of having more bed usage. I know what your thinking, "But Troy it's a friggin ratrod" I know it's a ratrod/hotrod but it's mine and my ideas are flying like pigs in shit. But alas much like my bulldog puppy they are far far away from me.

The bed I got was a little rusty but it has good sides and will need cut down, so I can't wait to get to that. I got a nice 30" metal bender/brake, and a new metal shear. The last pair failed me and left me with no option but to return it. So that's done.

Well I'm out for the day

If anyone wants to leave comments feel free.

troy